Chuck' Doswell's Outdoor Photography Advice

NOTE: This information has been reproduced for the World Wide Web via permission by the author. Please acknowledge him for any use of this material in any form of media.

Chuck says....

First of all, I often use a polarizing filter, but not always. I do NOT generally use a "Skylight" or "UV" filter ... but I have been considering it for some time of late, having damaged lenses in various ways and having noted how much clarity my vision gets from the UV filter in my prescription sunglasses.

Image clarity depends on many factors, and of course, I am not scanning and posting images I have taken that do not have clarity! That is, I do not show off my failures. I offer the following thoughts:

  1. Use good quality lenses. For many of us using Canon (me!) or Nikon equipment, this means we tend to stick with Canon or Nikon lenses, as op- posed to buying "third-party" lenses (e.g., Sigma, Spiratone, Cambron, etc.). It's not that those lenses are NECESSARILY inferior, but I like to stick with the lenses made by my camera's manufacturer.

  2. Use good quality filters, sparingly. A filter is another optical device be- tween the subject and the film (the lens is one). The more devices in the chain,the more likely you are to introduce distortion.

  3. Use a tripod for virtually every shot.

  4. Always ensure that your lens is focused, usually on infinity for skyscapes.

  5. In cases where your shutter speed is between about 1/30th and 1 second, it is advisable to lock up your mirror (in an SLR 35 mm) before you expose. In this range, the image is likely to be affected by the shock of the mirror flipping up during the exposure.

  6. Long lenses used to bring distant objects up close will typically involve a contrast loss, due to the intervening distance. It's better to get closer and use a shorter lens. Although zoom lenses have improved greatly in the last 10 years, a fixed focal length lens is almost always sharper than a zoom lens, and usually has fewer elements inside (see #2).

  7. All else being equal, use f-stops near the upper middle of the range: f8 or f11. Most lenses perform best in this range in terms of sharpness and contrast. It is best to avoid the extremes of the aperture range at either end, but especially so at the larger apertures (smaller f-numbers). A wide-open lens typically has substantially inferior sharpness and contrast to one that is stopped down.

  8. For most slide film, a slight underexposure (on the order of a half-stop) produces the best, most saturated color. I use Fuji Velvia for most of my daylight shots ... I use Kodachrome 64 for lightning shots at night .. see my home page for more discussion. Using slow film (ISO 100 or less) means fine grain, which translates into image clarity. Since I do not use print film, I have nothing to recommend along that line.

  9. Be aware of the sorts of situations that produce the best images. There is no way to describe how generally to do this ... practice, practice, practice! If you cantrain your brain to SEE and not just to "look" then it can help you in this directly.

  10. The weather influences clarity a lot! In the relatively dry, clean air of the Great Plains, High Plains, and Rocky Mountains, you are more likely to get the right sort of conditions for image clarity than in the hazy, polluted air of the Eastern third of the country.

  11. I can offer little or no advice to users of cameras that do exposure automatically. I am so old-fashioned, my cameras have a mechanical shutter! If you are using an automatic exposure camera, as far as I'm concerned, you're on your own.